Advertisement
4.6. Reversing The Doors
The door opening can be reversed from "right hand hinged" to "left hand hinged"
if required.
Warning! When reversing the door, the appliance must not be connected
to the mains. Remove the plug from the mains beforehand.
Left Foot
Remove the screws and upper-hinge assembly then lift and remove the
-
freezer door away from the middle hinge assembly. Now remove the
hinge pin from the upper hinge, turn the hinge over and refit the pin into
the same hole.
Remove the screws and middle hinge assembly then lift the fridge door
-
away from the lower hinge assembly.
Remove the screws, lower hinge and foot assembly. Now remove the
-
hinge pin from the lower hinge, turn the hinge over and refit the pin into
the same hole.
Remove the left foot and refit on the right-hand side.
-
Now fit the lower hinge and foot assembly to the left-hand side. Tighten
-
the screws.
Place the fridge door onto the lower hinge and then refit the middle
-
hinge into the pre-drilled holes on the left-hand side of the cabinet.
Tighten the screws.
Now place the freezer door onto the middle hinge and then refit the
-
upper hinge into the pre-drilled holes on the left-hand side of the
cabinet. Tighten the screws.
Ensure that both doors are correctly aligned and that they seal correctly.
-
If the doors require further alignment, slacken off the screws, re-align
the doors then tighten the screws.
Lower Hinge and Foot Assembly
14
Upper Hinge Assembly
Middle
Hinge
Assembly
Advertisement
