Advertisement
Section 3. Operating the Appliance
3.1. Switching on the Appliance
Allow the appliance to stand for a minimum of 4 hours after installation.
-
Plug in the appliance and switch on at the mains supply.
-
Set the thermostat control to the required setting as detailed in the
-
Temperature Control section (3.2.).
Leave the appliance for approximately 4 hours for the correct
-
temperature to be reached.
3.2. Temperature Control
The temperature selector knob is located on the right hand side of the
refrigerator interior adjacent to the light unit (see Description of the Appliance on
page 2).
Setting "0": Unit Off
-
Setting "1": Unit On – Warmest Temperature
-
Setting "3" to "4": Normal Operation (adequate for most situations)
-
Setting "7": Coldest Temperature
-
Important!
During high ambient temperatures e.g. on hot summer days, it may be
necessary to set the thermostat to the coldest setting (position 7). This may
cause the compressor to run continuously in order to maintain a low
temperature in the cabinet.
3.3. Storing & Freezing Food in the Freezer
This appliance has a four star freezer that is suitable for the long-term storage
of frozen food items. It can also be used for freezing and storing fresh food
items.
You should always follow the storage guidelines printed on each food producers
packaging, however the following information is provided as a general guide for
the maximum storage life of frozen items:
Fresh Meat and Poultry – up to 12 months
-
Cooked Meats – up to 2 months
-
Fresh Fish – up to 6 months
-
Fruit and Vegetables – up to 12 months
-
Bread and Cakes – up to 6 months
-
10
Advertisement
