Finishing; Sleeve Extension Installation - Wolf Steel DHMFG3850 Installation Manual

fi nish framing
6.0 fi nishing
EN
6.1

sleeve extension installation

1. Loosen screws and slide the extension out until its fl ush with the fi nish material.
2. Tighten screws.
Not extended
IMPORTANT:
* The minimum clearance from combustible material must be maintained top and sides
from the extension sleeve.
16
W415-2968 / B / 04.30.21
Fully extended
1/2" min.*
Sleeve
extension
Sleeve

Finishing

material
Type 1
1/2" min.*
Sleeve
extension
2"
Sleeve
Finishing
material