Summary of Contents for Enerdrive Gen2 TRUE SINE WAVE
Page 1
Rev. 1.4 More information https://www.caravansplus.com.au...
Page 2
Important Please be sure to read and save the entire manual before using your Enerdrive Gen2 Inverter. Misuse may result in damage to the unit and/or cause harm or serious injury. Read manual in its entirety before using the unit and save manual for future reference.
Table Of Contents 1. Introduction IMPORTANT SAFETY INFORMATION: 2. Product Description 3. Features Understanding the unit features: 4. Installing the Inverter System Material Preparation for Installation Inverter Installation: Inverter DC Input Connection: 5. Testing the Power Inverter: 6. Unit Operation Turn ON and OFF the unit Understanding the ‘Status’...
1. Introduction Thank you for purchasing the Enerdrive Gen2 Inverter. With our state of the art, easy to caravan, 4WD or commercial vehicle. The Enerdrive Gen2 Inverter can run many AC powered appliances when you need AC power anywhere. This manual will explain how to use this unit safely IMPORTANT SAFETY INFORMATION: This section contains important safety information for the Enerdrive Gen2 Inverter.
• Inverter is not to be used by persons with reduced physical or mental capabilities or lack of knowledge and experience. Not to be operated or used by children. 2. Product Description The Enerdrive Gen2 Inverter package includes the items list below. • Gen2 Inverter •...
Use mounting template on the following page to mark the positions of the mounting screws. • Drill the 4 mounting holes and place the inverter in position and fasten the inverter to the mounting surface. Page 8 Enerdrive Inverter Gen2 400W 12V Owners Manual Rev: 1.4 More information https://www.caravansplus.com.au...
Page 9
More information https://www.caravansplus.com.au...
“Typical Wiring block diagram of the Power Inverter” on page 5. • Unit is ready for use. CAUTION: Please be sure all the connections are tight before the use of the unit. Page 10 Enerdrive Inverter Gen2 400W 12V Owners Manual Rev: 1.4 More information https://www.caravansplus.com.au...
5. Testing the Power Inverter: • Enerdrive Power Inverter is ON. AC output is now available. • Plug in a small AC load like a 25W table lamp or small appliance to the AC socket to verify AC is available.
This port is used for turning the unit On and OFF using a +12V signal. An insulated female connector is required to connect to the port. Connecting to +12V will turn ON the unit and removing the +12V signal will turn OFF the unit. Enerdrive Inverter Gen2 400W 12V Owners Manual Rev: 1.4 Page 12 More information https://www.caravansplus.com.au...
Estimate Run time on Load The following run times are an estimate based on using a 12V-120AH battery bank for 12V systems. Actual run time may vary. Load Consumption Estimate Run time Cordless Phone 150 hrs Clock/Radio 100 hrs Table Lamp 40W / 60W 27 hrs/ 18 hrs Freezer (249 Litre)
Page 14
0ºc to 40ºc Storage Temp. -20ºc to 60ºc Relative Humidity 5 - 90% non-condensing Weights and Dimensions Weights 1.1 kg Dimensions 218 x 152 x 66 mm Page 14 Enerdrive Inverter Gen2 400W 12V Owners Manual Rev: 1.4 More information https://www.caravansplus.com.au...
Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions, as described in the complete Enerdrive Warranty Policy) for up to 5 years from the date of purchase.
Page 16
ENERDRIVE PTY LTD P.O. Box 9159, Wynnum Plaza, Queensland, Australia 4178 Ph: 1300 851 535 / Fax: 07 3390 6911 Email: support@enerdrive.com.au Web: www.enerdrive.com.au More information https://www.caravansplus.com.au...
Need help?
Do you have a question about the Gen2 TRUE SINE WAVE and is the answer not in the manual?
Questions and answers