1. Manuals
  2. Brands
  3. TECHFASS Manuals
  4. Rfid Systems
  5. MREM 82 NOGBKP
  6. Manual

TECHFASS MREM 82 NOGBKP Manual

Rfid module 13,56 mhz, 125 khz
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MREM 82 NOGBKP
RFID module 13,56 MHz, 125 kHz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MREM 82 NOGBKP and is the answer not in the manual?

Questions and answers

Related Manuals for TECHFASS MREM 82 NOGBKP

Summary of Contents for TECHFASS MREM 82 NOGBKP

  • Page 1 MREM 82 NOGBKP RFID module 13,56 MHz, 125 kHz...
  • Page 2 Introduction RFID reader module MREM 82 NOGBKP (13.56 MHz reader / dual reader 13.56 MHz and 125 kHz) with integrated controller for one door control is designed either for connection to the RS 485 bus of the APS mini Plus access system or for autonomous operation.
  • Page 3 e. Block diagram ▪ Complete door control; lock control (open drain), door contact input, exit button, alert output to PC or cloud, wiegand input, system bus, power supply. The reader module can operate autonomously or as a part of the system.

  • Page 4: Table Of Contents

    Electrical parameters ....................5 Communication interface .................... 5 Mechanical parameters ....................5 Assembly ........................6 Cable connection of MREM 82 NOGBKP, NIGBKP ........... 6 System bus ......................... 6 Assembly ........................7 RFID reading ......................9 Reading at 13,56 MHz ....................9 Reading at 125 kHz ....................

  • Page 5: Technical Parameters

    Glass material Tempered glass IV – outdoor general device, II – indoor general device, Environment class -25 ÷ +70 -25 ÷ +70 IP code IP 55 IP 20 IK code IK 07 www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 6: Assembly

    2 Assembly 2.1 Cable connection of MREM 82 NOGBKP, NIGBKP MREM 82 NOGBKP is connected via 2 m cable „pig tail“ type. It consists 10 wires with following functions: MREM 82 NOGBKP NUMBER COLOR WIRE DESCRIPTION WHERE IT LEADS (EXAMPLE) Pink OUT 2;...

  • Page 7: Assembly

    If a 125 kHz reader is used, it is necessary to take into account another 125 kHz reader in direct range - for example when checking the door on both sides. In this case, the readers may interfere with each other. In the techfass system, it is possible to use the so-called synchronization of reading between the reader and the reading module, which then do not interfere with each other.
  • Page 8 Route the cable and mount the reader module. CATALOGUE NUMBER PART DESIGNATOR COLOR MAT5003D013 Adapter for WRE 120, surface cabling BLACK www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 9: Rfid Reading

    For the frequency 13,56 MHz, the format and length options of the so-called "card serial number" can be set according to the table above. Similarly for the TF Mobile ID mobile application. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 10: Reading At 125 Khz

    The dual variant of the device allows reading media according to 3.1 and 3.2 at the same time. ® ® jsou registrované obchodní značky NXP B.V. MIFARE a MIFARE Classic ® je registrovaná obchodní značka Google LLC. Android www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 11: Wiring Diagram

    32 modules can be placed on one line of the APS mini Plus system. The line ends in the switchboard with a LAN converter or a cloud connector, also with an ethernet output. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 12 DIO module to OUT 1 of the internal reader module. RS 485 can be connected to the reader module in wiegand output mode (possible update fw over the line). www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 13: Settings

    5 Settings 5.1 Setup procedure If we want to set the reader module MREM 82 NOGBKP, e.g. its HW address or configure its parameters, we must connect it to the computer and control software. Physical connection is possible using the device...

  • Page 14: Meaning Of Led Indicators

    Address setting mode / Red / green flashing Red / green RS 485 system bus test Continuously lit, flashing Programming mode Yellow Short flashing, period 1 s Door lock release indication www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 15: Configurable Parameters

    * Valid for standard output mode (lock control). Not valid for change of state option. ** In WebHit, the time shift is done automatically according to the selected time zone. *** Online authorization function is not available yet in WebHit. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 16: Operating Modes

    WIO 22 module to its Wiegand output, we place WIO in a safe place, eg in a rack / cabinet or from the inside above the door, from where it already controls the lock. The WIO module must first be paired with the MREM 82 reader module. https://www.techfass.com/cs/produkty/102/produkt/402/wio-22 www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 17: External Reader With Wiegand Output

    Facility code 0x01 + 16 data bits Facility code 0x01 + 16 data bits (MSB) (MSB) (MSB) 56 data bits (MSB) 56 data bits (MSB) 56 data bits, reversed (LSB) 56 data bits, reversed (LSB) www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 18: Function

    It is possible to set a flag for each ID, which will cause an alarm ‘‘ Alarm - ID with the flag ‘‘ when reading the appropriate ID (and will activate the alarm output for a defined time). www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 19: Id Expiration

    The following alert conditions may occur during the reader module operation: 1) Tamper. (these in no tamper in the reader module MREM 82 NO/IGBKP) 2) Forced door. 3) Door ajar. 4) Antipassback alert (time, zone). www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 20 Reading a valid ID has no effect on the alarm conditions themselves. It is terminated with a valid ID only an audible alarm, followed by the "door open" function. Reading an invalid ID only interrupts the audible alarm for the duration of the "invalid ID" signaling. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 21: Simplified Access Rights Model

    The behavior of the modules in the programming mode is evident from figures below. When inserting cards using programming cards, it is not possible to work with time schedules, so the cards are still valid. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 22 After this yellow LED. indicated by fast flashing of step the module quickly flashes yellow LED. with yellow LED Step 4 - A Step 4 - B Step 5 www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 23 Card 3 gets lost using the card Read + (inserting) programming card, then 5x + (inserting) programming card again, then card 4, and finally – (deleting) programming card. Register the change in your table. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 24 A new card is always inserted at the position after the last inserted card. In case of deleting all cards using the procedure described in chapter 7.10.4, it is necessary to create a new filing table. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...

  • Page 25: Other

    8.3 Electrical waste According to WEEE directive (2012/19/EU), this product cannot be disposed of as unsorted municipal domestic waste and has to be returned to recycling center after its lifetime is over. www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP...
  • Page 26 TECH FASS s.r.o. Věštínská 1611/19, Praha...

This manual is also suitable for:

Mrem 82 nogbkp-mfMrem 82 nogbkp-emMrem 82 nigbkpMrem 82 nigbkp-mfMrem 82 nigbkp-em534821e2 ... Show all

Table of Contents