Charging - Silvercrest SAST 18 A1 Operating Instructions Manual

Charging

NOTE
► Check to ensure that the On/Off switch q has been pushed back (to the
position "OFF") before starting the charging process .
■ Hang the appliance into the wall bracket 7 from above . The catches on the
wall bracket 7 should slide into the recesses on the motor unit r and the
barrel plug 9 into the socket on the lower end of the motor unit r . The
charge indicator lamp w flashes red and the charging process begins .
■ When charging is complete, which can take around 5 to 5 .5 hours with fully
discharged batteries, the charge indicator lamp w lights up green . The
appliance automatically switches to trickle charging . Nevertheless, in order
to avoid possible damage to the batteries, do not leave the appliance
permanently connected to the mains adapter 0 .
■ Recharge the batteries again if the appliance's suction power becomes
appreciably weaker and the charge indicator lamp w flashes green .
NOTE
► If the charge indicator lamp w flashes alternately green and red, the
battery is almost completely discharged and the appliance switches off
after approx . 1 minute . This protects the appliance from deep discharge .
► The appliance can also be charged directly via the mains adapter 0 . To
do this, remove the barrel plug 9 from the wall holder 7 with a slight twist
and insert it into the socket on the appliance .
► The appliance cannot be operated during charging .
■ 50 │ GB │ MT SAST 18 A1