Applications
Mono subwoofer system (APX2180 and APX4360)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Note:
You may bridge the front, rear or both pairs of channels using the above
settings.
APX/DPX Amplifiers
-
LEFT
+
-
+
RIGHT
FRONT
REAR
-
+
-
+
2
2
BRIDGED (4
)
Stereo Amp configuration (APX2180)
•
Set crossover mode to LP
•
Set input mode switch to L + R (Mono)
•
Set crossover frequency to ~80Hz
•
Fine-tune crossover frequency to suit
musical tastes and performances
•
4Ω min
REM
GND
+
12V
FUSES
Stereo Amp configuration (APX4360)
•
Set rear crossover mode to LP
•
Set input mode switch to L + R (Mono)
•
Set crossover frequency to ~80Hz
•
Fine-tune crossover frequency to suit
musical tastes and performances
•
4Ω min
15