GUIDESMAN 272-1778 Setup & Takedown Instructions

SETUP & TAKE DOWN INSTRUCTIONS
Parts Included: Fully Assembled Frame (1) Canopy Top (1) Carry Bag (1) Stakes (4)

SECURING THE CANOPY TOP TO THE FRAME

Place the canopy frame in the desired location (Fig. 1A).
1
With partner, stand opposite side of the frame and hold the outer legs.
While holding the legs lift slightly off the ground taking a few steps backwards
2
to extend frame at full arm's length as shown (Fig. 2A)
Unfold the canopy top and place it over the open frame (Fig. 3A). Secure each corner by attaching the corner
3
of the canopy top to the black fastening strip (Fig. 3B). Pull all 4 corners down until completely
over black fastening strip. Your canopy top is now secure to the frame.
Fig. 1A

SETUP

Place the canopy in the desired location for shade. With partner standing on the opposite side of the canopy,
1
hold the outer legs and lift slightly off the ground stepping backwards (Fig. 1A).
With partner hold the top and bottom of the middle of the eaves where it makes a diamond shape as
2
pictured in (Fig. 2A) lifting slightly off the ground walking backward to extend the frame.
Be careful not to pinch your fingers as the frame opens!
At the top of the leg, place one hand on the top corner pushing down and with the other hand just below the
3
latch slider lifting up until it locks into position as pictured in (Fig. 3A). Repeat on other 3 legs.
With partner standing on the same side, lift outer leg to slide out inner leg until the chrome
4
button clicks into place at desired height as shown (Fig. 4A). Repeat on opposite legs.
Fig. 1A
THANK YOU FOR PURCHASING A GUIDESMAN INSTANT CANOPY!
Please carefully review the following instructions and familiarize yourself with
parts included and how to operate your canopy. Reference parts list for names
of each part noted in instructions.
#272-1778, #272-1779, #272-1780
Fig. 2A
Fig. 2A
Fig. 3A
Fig. 3A
Fig. 3B
Fig. 4A