Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TECHNIMOUNT BRACKET PRO 35-HD Series
Summary of Contents for TECHNIMOUNT BRACKET PRO 35-HD Series
- Page 1 35-HD BRACKET PRO SERIE ® USER GUIDE...
-
Page 2: Copyright
Copyright 2021 Technimount E.M.S. Holding Inc. (Technimount), an affiliated company of Technologies CGC Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount or its affiliate companies. -
Page 3: Contact Information
Please have the serial number of your Technimount product available (as shown in the figure below) when calling Technimount Customer Service or Technical Support. Include the serial number in all written communications. -
Page 4: Table Of Contents
Maintenance Program ............................27 Inspection and Maintenance Record .........................28 Training Record ................................29 Replacement Parts ...............................30 Warranty Policy ................................31 Limited Responsibility and Warranty .........................31 International Warranty Clause ..........................31 WARRANTY ................................31 RETURN POLICY ..............................32 Return Policy ................................32 BP35-HD UG 202110-01 www.technimount.com... - Page 5 Prior to 30 Days ..............................32 Prior 45 Days ................................32 Prior 60 Days ................................32 Return Authorization ..............................32 Damaged Merchandise ..............................33 Claim Process ................................33 Required Information ............................33 Findings and Conclusion .............................33 Questions about our Policy ............................33 SAE CERTIFICATION ............................. 34 www.technimount.com BP35-HD UG 202110-01...
-
Page 6: Introduction
Introduction PURPOSE OF THE DOCUMENT This User Guide is designed to assist you with the installation, operation and maintenance of the Technimount Bracket Pro Serie 35-HD for the LIFEPAK 15 monitor/defibrillator from Stryker Corporation. PRODUCT DESCRIPTION The Bracket Pro Serie® 35-HD Mounting System is the only universal solution to mount the LIFEPAK 15 monitor/ defibrillator from Stryker in different applications such as, on surface, floor, and cot/stretcher systems. -
Page 7: Possible Mounting Options For The Bracket Pro Serie® 35-Hd
Introduction POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE® 35-HD Standard Surface Base Safety Arm System Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 8: Symbols And Definitions
Introduction SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Warning and Caution, special attention is required. Consult accompanying documents Safe working load symbol and Load balance symbol Pinch Point Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com... -
Page 9: Warning / Caution / Note
NOTE Provides special information about the product. Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 10: Product Illustration
Front View Made from aluminum with black-anodized finish Front handle for ease of use CNC machined acetal feet to protect the Standard Bottom Disc and medical device when placed on a surface Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com... -
Page 11: Back View
Introduction PRODUCT ILLUSTRATION (CONTINUED) BRACKET PRO SERIE 35-HD (CONTINUED) Back View Silver-anodized aluminum Standard Bottom Disc Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 12: Specifications
Contact Technimount EMS Customer Service for more information or for other options at customerservice@technimount.com * Product and medical equipment manufacturers names are trademarks™ or registered trademarks® of their respective holders. Technimount does not have a commercial relationship with these medical equipment manufacturers. Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com... - Page 13 End User/Administrator is responsible to validate regulations and standards for safety in their region, in order to comply with applicable safety regulations. Technimount System is not responsible to inform the End User/Administrator of applicable legislation for safety in their area.
-
Page 14: Summary Of Safety Precautions
9 Do not place additional equipment or items onto the Bracket or mounts other than approved Technimount Systems or components, as this could damage the product and may result in injury to the patient or operator. - Page 15 9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts. 9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by Technimount System as these different systems may be from other brands or models and may not be compatible with Technimount Systems.
-
Page 16: Installation Guide
9 Electrical tools are not recommended, as there is a potential risk of damage to the threads. 9 During the installation process, Technimount recommends the use of medium strength threadlocker (Blue) to avoid premature loosening of screws during normal use. Put a few drops of medium strength threadlocker (Blue) on each screw prior to installation. -
Page 17: Installation Of The Bracket Onto Lifepak 15 Monitor/Defibrillator
3. Unscrew the three front screws of the protector, on each side of the device with the Torx T15 screwdriver (they may already be removed from your unit). Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... - Page 18 5. Slide the monitor/defibrillator into the main assembly. 6. Ensure that the medical device is inserted properly into the bracket. The front slots should align with the holes in the device. Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com...
- Page 19 9. Insert a #6 Flat Washer on each of the 6-32 x 5/8" screw. Insert and tighten the 3 screws in the front holes of the device. Ensure that the screws are installed and tightened properly. Return To Table of Contents www.technimount.com BP35-HD UG 202110-01...
- Page 20 Installation Guide INSTALLATION OF THE BRACKET ONTO THE LIFEPAK 15 MONITOR/DEFIBRILLATOR (CONTINUED) 10. The LIFEPAK 15 is ready for EMS transport. Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com...
-
Page 21: General Operating Guidelines For The Safety Arm System
9 Never let a patient grab, manipulate or hold the Safety Arm System, the Surface Base or bracket on the cot/ stretcher because it may cause injury to the operator or patient. Secure the Safety Arm System and bracket as recommended while the patient is on the cot/stretcher. Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 22: Operating The Bracket On The Safety Arm System
OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM INSTALLING THE BRACKET ON THE STANDARD BASE 1. Only Technimount brackets with a Standard Bottom Disc can be inserted into the Standard Surface Base located on the Safety Arm System. 2. The installation onto a Standard Surface Base is... -
Page 23: Removing The Bracket From The Standard Surface Base
2. While holding the Red Quick Release Mechanism, slide outwards horizontally to remove from the base. 3. Hold the LIFEPAK 15 from the middle of the unit to gently remove from the base. Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 24: Part Numbers
NOTE Technimount reserves the right to change Part Numbers and Products without notice. Please refer to Customer Service to ensure product part number availability. For any replacement parts or for repair, please contact Technical Support at techsupport@technimount.com... -
Page 25: Cleaning
Cleaning procedure below does NOT provide recommendations for cleaning of the medical device. The following cleaning guidelines consider the Technimount mounting assemblies and components. It is the responsibility of each EMS service to use the cleaning solution of their choice. All EMS service's have policies and procedures describing how they should clean and disinfect their medical equipment. -
Page 26: Removal Of Iodine Compounds
PREVENTIVE MAINTENANCE A preventive and regular maintenance program should be established for all Technimount equipment. Preventive maintenance may be required more frequently based on the usage level of the product. The bracket requires regular preventative maintenance. -
Page 27: Inspection Process And Schedule
If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com. Check each routine and replace damaged or worn out parts if necessary. -
Page 28: Inspection And Maintenance Record
Maintenance Guide INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com... -
Page 29: Training Record
Maintenance Guide TRAINING RECORD TRAINING DATE TRAINING METHOD USER GUIDE, IN-SERVICE, BASIC TRAINING TRAINEE NAME IN-CLASS, TRAINING UPDATE ETC. Return To Table of Contents www.technimount.com BP35-HD UG 202110-01... -
Page 30: Replacement Parts
The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer Service : +1.888.639.2758 or at customerservice@technimount.com... -
Page 31: Warranty Policy
Technimount products are intended to retain a medical device in place in the case of a single crash impact. A Technimount product must NOT be used again if it was involved in a crash. The product MUST be replaced. If the Purchaser uses a Technimount product following a crash, it is at the Purchaser’s own risk and Technimount will not be... -
Page 32: Return Policy
▪ Product must be undamaged and in its original packaging ▪ The product return request must be provided in writing and it must be approved by TECHNIMOUNT prior to returning the product ▪ Returns will not be approved on a modified or damaged item ▪... - Page 33 If the RMA request is approved, TECHNIMOUNT will provide you with an RMA number for your claim. We will also include instructions for the replacement of your product. No product return will be accepted without the RMA number labeled on the outside of the box being returned.
- Page 34 SAE Certification Return To Table of Contents BP35-HD UG 202110-01 www.technimount.com...
- Page 36 Technimount Ems Inc. Corporate Headquarters 3770 Jean Marchand Street, Suite 100-C Quebec (QC) G2C 1Y6 Canada T + 1 581.998.9820 F + 1 855.339.6351 technimount.com info@technimount.com © 2021 Technimount EMS Inc. - All Rights Reserved Printed in Canada...
Need help?
Do you have a question about the BRACKET PRO 35-HD Series and is the answer not in the manual?
Questions and answers