CONTENT IMPORTANT SAFEGUARDS GETTING TO KNOW YOUR VACUUM CLEANER TECHNICAL SPECIFICATIONS OPERATING INSTRUCTIONS RECOMMENDATIONS FOR ACCESSORY USAGE WINDING & UNWINDING THE POWER CORD POWER SWITCH USING THE APPLIANCE AS AN UPRIGHT VACUUM USING THE APPLIANCE AS A HANDHELD VACUUM CLEANING & CHANGING THE DUST CUP FILTER TROUBLESHOOTING...
IMPORTANT SAFEGUARDS When using your vacuum cleaner, basic safety precautions should always be followed. Read all below instructions before using. WARNING: to avoid the risk of fire, electric shock or injury: 1. Use the system only for its intended use. 2.
20. Do not immerse the vacuum in water or other liquids. 21. Keep end of hose, wands and openings away from your face & body. 22. Use the appliance on dry surfaces only. 23. Using improper voltage may result in damage to the motor and possible injury to the user. Correct voltage is listed on rating label.
TECHNICAL SPECIFICATIONS Model Number ST600 Voltage 120V Power 600W Dust cup capability 0.5L Suction Power 15Kpa OPERATING INSTRUCTIONS Note: Always remove the power plug from the wall outlet before assembling or removing accessories Inserting the metal extension tube into the main body Hold the hand vacuum and the extension tube, make the node (Fig.1) on the extension tube to be in...
Page 6
Push the tube into the vacuum cleaner until you heard a "click" sound as the tube will be locked into place.(Fig. 3) Pull the handle upwards to make sure the tube is locked into the hole(Fig.4) To detach the extension tube, press the release button on the side of vacuum cleaner and pull out(Fig. 5) Attaching the floor brush to the main body Push the floor brush into the suction hole opening.
Using the crevice tool Push the end of crevice tool back(Fig.6) and turn it 180 degree(Fig.7), then push the other end of crevice tool into the suction hole(Fig.8). RECOMMENDATIONS FOR ACCESSORY USAGE Crevice tool: for radiators, crevices, corners, base-boards and between cushions. Floor brush: for all kinds of flooring, including carpeted and tiled floors.
POWER SWITCH • There are two On/Off power switch on the appliance. (Fig.11 & Fig.12) • Push on the “I” side to turn the vacuum ON. • Push on the “O” side to turn the vacuum OFF. USING THE APPLIANCE AS AN UPRIGHT VACUUM •...
CLEANING & CHANGING THE DUST CUP FILTER Changing and cleaning the dust cup filter In order to achieve the best performance, empty the dust cup and clean the dust cup filter after each use. 1. To remove the dust cup, press down on the dust cup release button (Fig. 13) and separate the dust cup from the main body.
3. There are puncture/hole in 3. Replace dust cup filter. the dust cup filter. If you have a query about your APOSEN appliance, please contact the APOSEN customer service email: usa@iaposen.com...
Need help?
Do you have a question about the ST600 and is the answer not in the manual?
Questions and answers