Connecting To The Switch Ports - Cisco IE 3000 Getting Started Manual

Cisco IE 3000 Switch Getting Started Guide
Step 3 Optionally, insert a second power and relay
connector into the Pwr B receptacle on the
switch front panel.
Step 4 Use a flathead screwdriver to tighten the captive screws on the sides of the second power and
relay connector.
Optional Procedures

Connecting to the Switch Ports

OL-16234-01
For detailed instructions on these procedures, see the Cisco IE 3000 Switch
Hardware Installation Guide on Cisco.com.
Wiring the external alarm relays
•
Connecting the switch to the optional PWR-IE3000-AC power converter
•
Mounting the switch on the wall
•
• Installation in a hazardous environment
These sections describe how to connect to the switch ports, the SFP module ports,
and the dual-purpose ports. For additional cabling information, see the Cisco IE
3000 Switch Hardware Installation Guide on Cisco.com.
Connecting to 10/100 and 10/100/1000 Ports, page 22
•
Installing SFP Modules and Connecting to Ports, page 23
•
Connecting to Dual-Purpose Ports, page 24
•
Connecting to 100BASE-FX Ports, page 24
•
Verifying Port Connectivity, page 24
•
Cisco IE 3000 Switch Getting Started Guide
21