Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 BLU-MBCD QUICK START INSTALLTION GUIDE FOR MERCEDES BENZ WITH CD CHANGER...
One button (conveniently installed on the dash) does it all. The microphone captures your voice commands and allows your phone to make calls and launch important applications. The BLU-MBCD works in 1994-98 Mercedes Benz with analog CD changer. Band and does not interfere with normal radio operation.
Page 3
Fig. 5 Connect harness 10-pin plug (See Fig. 6) to radio (C) socket vacated in step 2 (See Fig. 4) Fig. 2 Disconnect 10-pin plug (See Fig. 3) from radio (C) socket (See Fig. 4) and connect it to harness 10-pin socket in Fig. 5 Fig.
Page 4
Fig. 8 Fig. 11 harness Module Secure/Install microphone to visor or headliner (See Fig. 12 & 13) using visor clip Fig. 9 connecting diagram Fig. 13 Fig. 12 Connect harness 16-pin plug (See Fig. 10) to Bluetooth module (See Fig. 11) Visor clip Microphone Carefully route microphones cable 1/8”...
Pairing and connection This process is required upon initial install. After initial pairing, the BLU-MBCD will automatically reconnect with paired device upon entering the vehicle. Fig. 15 Turn vehicle ignition to “ON”. Control button Press and hold control button for 2-4 seconds (red/green LED inside Route control button PINK and BLACK wires (See Fig.
CD changer usage purchases our 2) Press and hold (2 seconds but less than 4 seconds): to reject call 2. Does the BLU-MBCD work on all Mercedes radios? Call mode (during a hands-free call) This Bluetooth receiver kit works in 1994-98 Mercedes with Becker BE1492,...
Need help?
Do you have a question about the BLU-MBCD and is the answer not in the manual?
Questions and answers