Tools And Equipment; Unpacking The Router - Cisco Router 12010 Unpacking Instructions Manual

Tools and Equipment

Unpacking the Router

78-16075-02
You need the following items and tools:
• 3/16-inch flat-blade screwdriver
1/4-inch flat-blade screwdriver
•
• 9/16-inch (14-mm) wrench
10-mm wrench (open-end or socket)
•
Wire cutters
•
• Pliers
This section explains how to unpack the router from the shipping pallet.
Figure 2 shows the main packing material and accessory kit container. The
accessory tray that fits on top of the cushioning contains:
• Front and midtrack-mount brackets and securing hardware
Blower module front cover (Original series only. Enhanced series routers ship
•
with the front door installed.)
• User documentation
Cables
•
Save the packaging materials in case the router has to be repackaged to be
Note
shipped again. Repackaging instructions are located in the Cisco 12010,
Cisco 12410, and Cisco 12810 routers Installation and Configuration
Guide.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions
Tools and Equipment
3