Bodypoint HW100-150 Installation And User Instructions

Bodypoint HW100-150 Installation And User Instructions

Shoulder harness strap guides
Hide thumbs Also See for HW100-150:

Advertisement

Shoulder Harness Strap Guides
I N S T A L L A T I O N A N D U S E R ' S I N S T R U C T I O N S
A R T N O S . H W 1 0 0 - 1 5 0 , H W 1 0 0 - 2 0 0 , H W 1 0 5 S , H W 1 0 5 L
These instructions provide important information for the safe use and maintenance of all Bodypoint
Shoulder Harness Strap Guides. Give these instructions to the user or their caregiver and review them
to ensure that they are understood.
WARNING! Product should be installed and
fitted by a qualified rehab technician.
This product is intended for mounting position-
ing harnesses. It is NOT intended for use as a
transportation safety device.
WARNING! This product should only be used
for positioning a person in a wheelchair or work
chair. It is NOT intended for use as a transporta-
tion safety device, as a personal restraint device,
or in any other application where its failure could

PACKAGE CONTENTS

Package may contain one or more of the following:
• Strap Guides, 150mm or 200mm long, with fasteners
• Mounting Adapter, Small (185mm) or Large (270mm wide), with fasteners
© 2019 Bodypoint, Inc. All rights reserved.
result in injury. Misuse of this product is
unauthorized and unsafe.
WARNING! This product carries a limited
lifetime warranty against defects in workmanship
and materials arising under normal use by the
original consumer. Contact your supplier or
Bodypoint for warranty claims.
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
en
BPI104-en 2019.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HW100-150 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bodypoint HW100-150

  • Page 1 A R T N O S . H W 1 0 0 - 1 5 0 , H W 1 0 0 - 2 0 0 , H W 1 0 5 S , H W 1 0 5 L These instructions provide important information for the safe use and maintenance of all Bodypoint Shoulder Harness Strap Guides.
  • Page 2 INSTALLATION REQUIREMENTS Wheelchair with a solid backrest of metal or plastic, up to 4mm (5/32”) thick. Thicker backrests will re- quire longer mounting screws with a minimum pullout strength of 90kg (200lbs) (Not included in package). POSITIONING Seat user in wheelchair and establish correct posture with pelvic support belt.

This manual is also suitable for:

Hw100-200Hw105sHw105l

Table of Contents