Introduction; Specifications; Installation; Unpacking & Inspection - Baum FLEXIFOLD Installation & Operation Manual

Your new Flexifold 2nd Station has been designed to give you many years of useful service provided it is installed,
maintained, and operated according to the instructions in this manual.
Your Flexifold 2nd Station is a unique and versatile paper folding machine, capable of folding paper measuring be-
tween 3 x 5 inches (7.6 x 12.7 cm) and 14 x 20 inches (35.5 x 50.8 cm), at speeds up to 27,600 sheets per hour of 8 1/2 x 11
(21.6 x 27.9 cm) and up to 41,000 sheets per hour of 3x5 (7.6x12.7 cm). The Flexifold can make four types of folds: single
fold, letter fold, fan fold, double-parallel fold, with the push of a button. (Note: There are also three (3) memory locations for
special folds that you may require).

2.0 SPECIFICATIONS

Model No
Minimum Sheet Size
Maximum Sheet Size
Minimum Size Fold
Maximum Paper Weight
Fold Roll Speed
m/min.)
Fold Plate Depth
Fold Roll Width
Fold Roll Diameter
Overall Dimensions
Operating Voltage
Supplied power 230VAC +/-10% / 50HZ, 15AMP
115VAC +/-10% / 60HZ, 15AMP
Mating Connector
This machine has been tested in accordance with
EN13023:2003 Standard.

1.0 INTRODUCTION

Flexifold 2nd Station
3 x 5" (7.6 x 12.7 cm)
14 x 20" (35.5 x 50.8 cm)
2 " (5.1 cm)
65 lb. Cover
Infinitely variable between
1900"/min. and 7200"/min.
(18,288 cm/min. or 182
#1 Plate, 13.5" (34.3 cm)
#2 Plate, 13.5" (34.3 cm)
14 1/8" (35.8 cm)
1 1/2" (3.8 cm)
Height 53" (134.6 cm)
Length 64" (162.6 cm)
Width 28" (71.1 cm)
230 VAC/1PH/50Hz
115VAC/1PH/60Hz
230VAC - CEE 7
115VAC - NEMA 5-15R
PAGE 21

3.0 INSTALLATION

3.1 Unpacking & Inspection
The Flexifold 2nd Station is packaged in three
cartons, crated together as one package. It is broken down
into 8 major assemblies for shipment. These are:
A) Main Folder Assembly
B) Cross Carrier
C) Mobile Stand
D) Accessory Package
E) Transfer Table
F) Fold Pans (2)
G) Documentation Package
NOTICE
Immediately upon unpacking, carefully inspect each
of the above assemblies for shipping damage. If any dam-
age is found, be sure to contact the delivery freight carrier
to file a damage claim. Save all packaging material for the
claims adjustor to inspect.
TP10495A