Setting A Programme; Setting Additional Functions; Setting Timer Programming; Starting The Programme - Siemens SN57YS01CE User Manual

Table of Contents

Advertisement

en Basic operation

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the right programme button.
→ "Programmes", Page 19
a The programme is set and the pro-
gramme button flashes.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 19
Press the button for the relevant
additional function.
→ "Additional functions", Page 21
a The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
Press
or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h 25min) or "Finish at" (e.g.
15:20 hours). You can change this
setting in the "Basic settings"
→ Page 38.
To activate timer programming,
3.
press
⁠ .
Note: To deactivate timer program-
ming, press
4 seconds.
36
repeatedly until the
for approx.

Starting the programme

Press
.
a The programme has ended when
the display shows "Finished".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 37
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.

Advertisement

Table of Contents
loading

Table of Contents