Data logging
REDY Ph-meter Sensor
Réf : 488 010
3. First Use
When receiving your sensor, and before the first use, it is recommended to fully charge the
battery.
Use the USB-C cable supplied to connect the sensor to a USB port of a computer, or a
power outlet via a universal charger (like the USB mains charger ref. 805819, not supplied)
Before each practical work, plan to fully charge the device.
The battery life varies depending on the conditions of use and the number of
measurements and is designed to ensure a full practical session.
4. Starting Up
Press the Power button.
The device turns on. The value measured appears on the screen.
Your device is ready for use.
5. Using the Sensor in Connected Mode to a Windows Computer
The software Redy for windows is available for downloading on the Jeulin website.
•
•
•
The sensor is automatically detected. Its symbol appears in the software list of sensors :
ENGLISH
5.1 Installing the software Redy for Windows
5.2 Connecting the Sensor to the Software
Connect the sensor to a USB port of your computer.
Turn on the sensor by pressing on the position I, of the Power button.
Launch the software Redy for Windows by double-clicking on the icon present on
the desktop of the computer.
25