Quick manual
5.6
I WANT TO ADJUST THE PARALLEL CORRECTION AND THE SLOPE OF THE HEATING CURVE
For ADJUSTING THE PARALLEL CORRECTION AND THE SLOPE OF THE HEATING CURVE, 2 different methods are available:
5.6.1
Method 1
1.
On the main screen, touch the icon with the information about HEATING CIRCLE 1, HEATING CIRCLE 2 or HEATING
CIRCLE 3.
2. Press the icon
3. Pressing the icon
4. Every change of the setting is stored and confirmed with pressing the icon.
5. Exiting the menu is done by pressing the icon
6. For remaining heating circles, please repeat the steps 1 to 5.
once, to reach the PARALLEL AND SLOPE CURVE CORRECTION setting menu.
the parallel correction and slope correction of the heating curve is defined
.
30
TOUCH display