Selecting And Adjusting Drum Kits - thomann Millenium Drums MPS-150 User Manual

6.4 Selecting and adjusting drum kits

Selecting a drum kit
Adjusting kit volume
2. Adjust the playback speed using [–] and [+] (setting range: 30 to 280 beats per minute).
The setting is automatically stored.
You can select one of the preprogrammed drum kits. The preprogrammed voices of the drum
module can be programmed to any of the connected pads.
To select a certain drum kit, proceed as follows:
1. Press [MODE] repeatedly until the [KIT] LED lights up.
ð The display shows the kit number.
2.
Use [–] and [+] to select the desired kit (see
The setting is automatically stored.
1.
Press [MODE] repeatedly until the [KIT] LED lights up.
ð The display shows the kit number.
Ä Chapter 11.2 'Kit list' on page 42).
MPS-150
E-Drum Module
Operating
23