Advanced Settings - ADDER ADDERView CCS-MV4224 User Manual

Hide thumbs Also See for ADDERView CCS-MV4224:

Table of Contents

OSD - Advanced Operation

To get here

1 On the console keyboard, enter the following in succession:

Left Ctrl then Left Ctrl then o

(upper or lower case accepted)

2 Click the Advanced Operation menu item.

Reset to Factory Defaults

Removes all user entered configuration details. This operation cannot be

undone.

Note: To avoid accidental resets, press and hold (for roughly 4 seconds).

Reset Device

Effectively reboots the multi-viewer.

Note: To avoid accidental resets, press and hold (for roughly 4 seconds).

System Upgrade / Video Upgrade

Initiate either System or Video FPGA firmware upgrades. The label will

blink whilst the upgrade is in progress. See page 20 for a description of

the upgrade procedure.

Table of Contents

Need help?

Do you have a question about the ADDERView CCS-MV4224 and is the answer not in the manual?