Installation; Solution To Problems - Telmann TEL5FL Instructions For Installation And Operation Manual

Automatic drum washing machine
Table of Contents

Advertisement

Installation

Unpacking
Remove the package
levelling and
undamaged.
positioning
If you have any doubts, do not use the machine and call on a
qualified technician. Keep all packing parts (plastic bag,
foam rubber, screws etc.) out of the reach of children since
they could be dangerous.
Important:
The inside of the washing machine which
consists of a floating unit, is fixed with screws and tabs at the
back of the cabinet (Fig.1) during transport. Before starting
the machine remember to release the floating unit by
removing the above screws and take down the reinforcing
iron piece. To prevent water spray from entering the machine,
remember to close the holes left open by the screws with the
plastic caps provided in the packet containing the owner's
manual. And rescrew the holes where the iron piece is taken
down with the former two screws.Attention:keep the packing
screws and plastic caps in a safe place for later use. It is
important for the machine to be perfectly level (the angle of
inclination on the work surface must not be more than 2
degrees). For this reason the machine is fitted with
adjustable feet used for levelling the machine before use
(Fig.2). In the case of flooring with carpeting, remember to
check that the ventilation in the support area is not plugged.
Fig.1
and check that the machine is
Fig.2
4

Solution to Problems

The machine
Check that:
vibrates too
the transit bolts have been removed (see
much when
installation manual);
spinning
the machine is level;
the washing load is according to the instructions
given in this booklet.
The machine
Check that:
stops operating
there is a sudden power failure or water stop.
before finishing
the machine is in the normal state of rinse.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents