Haier HWM80-113S User Manual page 12

Midway spinning
1. Put the laundries into the spin tub evenly and smoothly.
2. Spin
(1) Put the gland in properly.
Please put in the gland properly even if the laundries quantity is small.
Push
Proper
(2) Close the inner and outer cover of the spin tub.
(3) Spin for 1-2 minutes.
3. Run the foam-removing spinning.
(1) Open the outer cover of the spin tub.
(2) Set the water-filling selector control
rod at the "SPIN" side. Fill water for
about 1 minute.
If the water quantity filled is too large,
the water may flow out from the wash
tub side. Please twist the water tap to
limit the water filling.
(3) Close the outer cover of the spin tub.
Spin for 1-2 minutes.
Gland
Push
The laundries
Proper
are slanting
Outer cover of
The spin tub
Inner cover of
The spin tub
Using process
Using process
No gland
WASH SPIN