Haier HWM60-78 User Manual page 8

Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
jointer of the
water inlet valve
Connection between the jointer of the water inlet hose
and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
Before Using Before Using
nut of the water
inlet hose
water absorption
cushion.
the jointer of the
water inlet hose
Slider
Locking lever
Locking lever
Slider
Child lock function
Push and hold the water level button and spin button, then push down the power on/off
button. The digitron displays CL . You can continue setting desired washing procedures.
After setting, push down the start/pause button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the water level and spin button at the same
time for more than 1 second. After a beepsound, the child lock function is released.
Reserve/remain time indicator digitron
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents103 minutes.
Page16
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 16)
Time remained
(minutes)
Reserve
(hours later)
WATER LEVEL
RESERVE
The washing machine can detect the laundries automatically.
In normal operation mode,
After detection,it will set the water level to suitable value
the reserve indicator
among 4, 6, 8,and 10 automatically.
light is off. The time
You can also set water level by yourself. After the machine is
remain indicator light is
started, it will not set water level automatically. You shall push
on. The digitron displays
the start/pause button to make new setting.
the time remained (in
If there's water inside the tub, the machine cannot detect the
minute) before the
laundries and will display water level 6 .
washing is finished. If wet laundries are put in, it may display water level 10 . You
Push down the reserve must set suitable water level by yourself.
If posthaste program is selected, it will display water level 3 .
button. The reserve
When water level 2 is reached in water filling, it will perform
indicator light is on the
washing while filling water.When water level 3 is reached, it
digitron displays the
will change to normal washing.
reserve time of finishing
During operation of wash and rinse program, you can push
washing (in hour).
down the water level button to add water. When you release
When the machine is
the button, or it reaches the overflow water level, the machine
started, the reserve
will stop adding water.
indicator light is on, The water level decided may be different from actual value
because of the different moisture level of the laundries.
indicatingthat the reserve
function is running.
Power On/Off button
Push the On/Off button to switch
on the power.
When the power is on, push it
again to switch offthe power.
Push the On/Off button to switch
on the power.
If the start/pause button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
POWER
ON/OFF
START
PAUSE
PROGRAM
After the power is switched on, push it to Start the machine
During working, push it to pause working.
During pause, push it to resume working.
Following automatic programs are available for selection
Applicable situation
Program
Common washing
Common
Posthaste wash of the laundry under 1 kg
Quick
with light soil
Super quick wash of the laundry under 1
Posthaste
kg with light soil
Washing the relatively big and thick laundriesr
Jean
Washing the normal laundries
Normal
Washing the cotton textiles
Cotton
Washing the woollen textiles
Woollen
Washing the textile
Silk