Safety Precautions - Haier HWM60-78 User Manual

Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomenan The reason
The top lid is opened during reserve
The digitron displays E0.
procedure.
The drainage cannot work, or is too slow. Is the drain hose put down?
Is the drain hose blocked?
The digitron displays E1.
It stops running in midway. The digitron
The top lid is not closed.
displays E2.
Are the laundries put slantingly?
The safety switch acts, and the
Is the machine slanting?
spinning cannot work. The
digitron displays E3.
The water filling does not work, or is Is the water tap opened, or is there water
supply failure?
slow. After about 15 minutes later,
Is the water inlet valve blocked?
the digital displays E4.
Is the water pressure too low?
The water level sensor is bad.
The digitron displays E6.
The power voltage is too low.
The digitron displays E8.
The power voltage is too high.
The digitron displays E9.
Is there power failure?
Not wash Is the power plug inserted tightly?
Is the water level reached preset position?
The machine does
not act
Is the power plug inserted tightly?
Is the top lid closed reliably?
Not spin
Are the laundries set flat?
Is the machine slanting?
There's abnormal sound
Are the laundries put slantingly in spinning?
inside the machine
Are there any foreign materials?
Is the screw of the jointer of water
The water tap leaks
inlet hose loose or awry?
Common phenomena
Phenomena
* The spinning is intermittent when it starts. * Balance the laundries to avoid slanting.
* The wash procedure pauses. * The cloth sensor is detecting the cloth. It will start
adding water after about 48 seconds.
* Select SPIN program, but it doesn't * The program is setting the drai n time. A certain
period is needed before it starts spinning.
work.
* The pulsator pauses during washing, ri n sing * It is to avoid splashing during water fill i ng.
or adding water.
* There may be some water flowing out of the * It is the water remained in the performance
drain hose in the first use of the machine. inspection by the factory.
How to settle
Close the top lid.
Put down the drain hose. Open and close the
top lid once.
Clean the foreign material. Open and close
The top Lid Once.
Close the top lid.
Reorder the laundries. Close the top lid.
The machine will start running after 10
seconds of being placed horizontally.
Open the water tap. Push the start/Pause
button once.
Clean the water inlet valve then push
the start/Pause button once.
Push the Start/Pause button once.
Please contact the after-sales
service department.
Pull off the power plug. Wait for the
voltage resuming normal before usage.
Please use it when there's power supply.
Insert the power plug tightly.
Fill water to the preset position.
Insert the power plug tightly.
Close the top lid.
Set the laundries flat.
Adjust the machine to be even
Reorder the laundries and close the top lid.
Remove the foreign materials.
Fasten the screw of the jointer properly.
Explanation

Safety precautions

Please plug the plug on special 220-240V AC receptacle.
Be sure to use single-phase three pins receptacle.Ensure
the earthing prong of the power receptacle is earth-
ed reliably.Use leakage protector if possible.
earth
Do not bend, stretch, twist, bind the power cord by force, or reformit.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent,or the after-sales service
department to avoid any risk.Keep the prong of the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
T h e v e n t i l a t i o n
holes at the bottom
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating .
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
Before Using Before Using
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure,delivering the maching,
setting the machine idle or cleaning the machine,Do
not plug or pull the power plug with wet hand.
Do not use water with temperature higher than 65
Do not wash water-proof laundry like the raincoat,
bikecovers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries.