Install The Water Inlet Hose - Haier 50FREE-3 User Manual

Install the water inlet hose

1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the
valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Jointer of the water inlet hose
Jointer of the
water inlet valve
Water absorption cushion
Figure 1
Figure 2
6
Wash remain time indicator digitron
The program is selected but not on,It displays the total minutes
of the program
During operation of programs, it displays the remained time (minute).
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
START
PAUSE
WASH button
PROGRAM SELECTION button
Push the WASH buttonto set the wash
procedure. You can select from the following four programs.
During STANDARD GENTLE HEAVY
programs, push theWASH button to set
different wash time (STANDARD from0 to
25minutes GENTLE from 0 to 15
minutes;HEAVY from 30 to 50 minutes or 0
minutes )
During SAVE program, push the WASH
button, the machine have no reaction.
Page 16
POWER
ON/OFF
Normal wash
STANDARD
Large, thick or heavily soiled laundry
HEAVY
Woollen textiles or underwear
GENTLE
10 min quick wash for load below 2 kg
SAVE
11