Haier Service-1200 User Manual page 11

Midway spinning
1.Put the laundries into the spin tub evenly and smoothly.
2.Spin
(1) Put the gland in properly.
Please put in the gland properly even if the
laundries quantity is small.
Push
Gland
Proper
The laundries
are slanting
(2) Close the inner and outer cover of the spin tub.
(3) Spin for 1-2 minutes.
3.Run the foam-removing spinning.
1
Set the inlet selector handle on spin side and
fill water for about 1 min.
In case water flows out from wash tub side
due to too much inflow, please turn down
the water tap a bit.
2
Close the spin tub outer cover and spin
for about 1 - 2 min.
Push
Proper
No gland
Outer cover of
The spin tub
Inner cover of
The spin tub
WASH
9
SPIN