Download Print this page

Washing Sequence - Haier Service-1200 User Manual

Twin-tub washing machine with pump
Hide thumbs

Advertisement

Washing sequence

Wash timer
Wash selector
(To set to below 2 minute,
(standard current,
first set to 5 minute then
strong current)
turn it back. it can increase
the service life of the timer).
STRONG
OFF
STANDARD
WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
DRAIN
BUZZER
8
Water-filling selector
Water-filling entrance
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
WASH
SPIN
STRONG
STANDARD
DRAIN
WASH SELECTOR
OFF
WASH TIMER
STRONG
STANDARD
DRAIN
WASH SELECTOR
SPIN TIMER
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5

Advertisement

loading

  Related Manuals for Haier Service-1200