Introduction; Introduction Controls - Haier HL40XP1 Owner's Manual

Introduction

Controls
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
Menu display. Press to access the on-screen
1 MENU
menu display.
Press to access the input source mode. Press
repeatedly to change the source to the one
2 INPUT
you want to watch. In the MENU screen, the
INPUT button serves as the ENTER button.
Press to adjust the volume. In the MENU screen,
3 VOL +/-
these buttons serve as left/right buttons.
Press to scan through channels. To scan quickly
through channels, press and hold down either
4 CH +/-
+/- . In the MENU screen, these buttons serve
as up/down buttons.
5 POWER
Press to turn on and off the TV.
Connect a HDMI device to receive digital audio
6 HDMI IN
and uncompressed digital video signals.
7 Headphone jack
Headphone audio output terminal.
Connect the composite video cable from an
8 AV2 VIDEO IN
external signal source to this jack.
Connect the audio L/R cables from the video
9 AV2 AUDIO IN
signal source to these jacks.
0 USB
Service only.
Receivers IR signals from the remote control.
A Remote Sensor
Do not put anything near the sensor, which
may block the remote control signal.
TV LCD-TFT Owner's Manual
Contents
EN-4