Introduction; Controls; Remote Control 8 - Haier HL26K1 Owner's Manual

Controls

This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
HL26R1/HL32R1/
HL42XR1
HL26K1/HL32K1/
HL32XK1/HL42XK1
HL32P1
1.MENU: Menu display.
2.INPUT: Press to
watch. In the MENU screen, the INPUT button serves as the ENTER button.
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down
either +/- . In the MENU screen, these buttons serve as up/down buttons.
5.POWER: Press to turn on and off the TV.
6. USB input: Connect a USB flash drive to view JPEG images or listen to MP3 songs.
7.Av2 AUDIO IN: Connect the audio L/R cables from the video signal source to these jacks.
8.AV2 VIDEO IN: Connects the composite video cable from an external signal source to this jack.
9.Headphone jack : Headphone audio output terminal.
10.HDMI IN: Connect a
11. Remote Sensor
6 TV LCD-TFT
Press to access the on-screen menu display
access the input source mode.
HDMI device to receive digital audio and uncompressed digital video signals.
Receives IR signals from the remote control.
Do not put anything near the sensor ,
Press repeatedly to change the source to the one you want to
which may block the remote control signal.

Introduction