Installation; Aerial Connection; Preparation Of The Remote Control Unit; Battery Installation - Haier 29F9K-D Owner's Manual

Installation

Aerial connection

For an optimum high quality picture, it is strongly advised that the TV set connect to an
external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite
(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be
transferred.
300 twin-lead cable
Antenna adapter
No including)
75 coaxial cable
Plug No including)

Preparation of the remote control unit

Battery installation

Take off the battery compartment cover. Place two AAA batteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Never place batteries in a fire.
Avoid dropping the remote control and/or getting it wet.
Connecting the TV set to the other video and audio equipment
Connection of AV input /output terminal
The figure below shows hot to connect external equipment using AV signals.
Mixer
There is also an AV input on the side of your television. Use the Left Audio input (white terminal on
the TV), if you are connecting equipment with mono sound. The MONO sound will be delivered by
both left and right speakers.
LASER DISC
VCR
Audio right input
Audio left input
Video input
Audio right output VCR
Audio left output VCR
output
Video VCR
DVD player
VCR
Video output
Audio left output
Audio right output