Acknowledgements; Safety Warnings; Equipment Description; Accessories/Associated Parts - Scheiber BATTERY VIEWER User Manual

ACKNOWLEDGEMENTS

We thank you for your purchase and hope that you are fully satisfied with this product.
Before you use this product, we recommend that you read the instructions below carefully.
This manual explains how to use and install the product in accordance with its intended use.

SAFETY WARNINGS

WARNING: Do not disassemble the device
Any contact with the product's internal components can cause injury. In the event of a malfunction,
only a qualified technician is authorised to repair the device
WARNING: In the event of impact
If the product falls or undergoes heavy impact, immediately contact a qualified person to ensure the
device is working correctly
WARNING: Unpacking the equipment
After unpacking the product, make sure that it is complete and in good condition. If you are not sure,
immediately contact a person with the required professional qualification
WARNING: Unpacking the equipment
Do not leave any part of the packaging within the reach of children or vulnerable adults

EQUIPMENT DESCRIPTION

Thanks to the BATTERY VIEWER (12V or 24V), get straight to the ultra-reliable and detailed evaluation of your battery in
real time:
•
Battery voltage,
•
Loading current,
•
Loading state,
•
Remaining operating time
The BATTERY VIEWER manages up to 6 batteries or battery parks. Each battery (or battery park) is monitored by an IBS
sensor (Intelligent Battery Sensor). The IBS sensor measures reliably and accurately the following values of batteries:
voltage, current, and temperature. Thanks to these measures various data are calculated about the State Of Charge
(SOC) and State Of Health (SOH) with an algorithm. It easily gives and in real time the end-user the detailed evaluation
of the battery.
ACCESSORIES / ASSOCIATED PARTS
ACCESSORIES TO ORDER SEPARATLY:
For a 12 V version:
Additional IBS sensors for each battery (IBS N°2 to N°6)
ref.: 50.IBS12V.30-02 001001 to 50.IBS12V.30-06 001001
For a 24V version:
Additional IBS sensors for each battery (IBS N°2 to N°6)
ref.: 50.IBS24V.30-02 001001 to 50.IBS24V.30-06 001001
16