Using Your Fastlane Pro; Product Installation Information; General Information - Endless Pools FASTLANE PRO Owner's Manual

Hide thumbs Also See for FASTLANE PRO:
Table of Contents

Advertisement

Section 14

USING YOUR FASTLANE PRO

Two wireless transmitters are included with the Fastlane Pro shipment which are used to turn the unit On/
Off and adjust the speed of the swim current. Press and hold the On/Off button (middle power button) to
turn the unit on. Press and hold the faster button (up arrow) to increase the speed of the swim current. Press
and hold the slower button (down arrow) to decrease the speed of the swim current. Turn the unit off by
pressing and holding the On/Off button.
The hydraulic power unit controller is equipped with a built-in timer, shutting the unit off after 30 minutes.
The Fastlane Pro will "remember" the speed of the swim current at which it was turned off and will default
to that same speed when the unit is turned back on.
Section 15

PRODUCT INSTALLATION INFORMATION

The product installation information MUST be completed by the installer prior to using the product.
1. Fill out the installation information below:
MONTH/YEAR INSTALLED
2. Hand the installation manual containing the above information to the customer to be stored with other
important pool related documentation.
Section 16

GENERAL INFORMATION

Once installed, the Fastlane Pro will provide years of exercise and fun with minimal maintenance. Clean
the intake grills of leaves as needed and wipe down the stainless steel cylindrical base and grab rail with
warm water, a Scotch Brite pad, and brisk rubbing. Clean the acrylic housing with any typical non-ammo-
nia, non-abrasive kitchen cleanser. Periodically, check all electrical and ground wire connections and test
the GFCI circuit breaker for proper function.
It is important for the long-term operation of your Fastlane Pro that your pool water be properly balanced
and in accordance with normal pool industry standards. In addition, it is imperative that the Fastlane Pro be
bonded to the pool bonding grid.
Endless Pools is an industry leader in customer service, should you ever have questions or concerns about
your Fastlane Pro, please contact our Customer Service Department at 800-910-2714 (US), 0800-520-0196
(UK) or 610-497-4538 (Direct).
________
Fastlane
Pro Swim Unit Installation
®
46

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FASTLANE PRO and is the answer not in the manual?

Questions and answers

Table of Contents