Loading The Dishwasher - Haier WQP12-AFM2 User Manual

Domestic dishwasher
Hide thumbs

Advertisement

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove the large food
particle to prevent the filter from becoming clogged,which results
in reduced performance.
If the pots and pans have baked-on food that is extremely hard to
remove, we recommend that they be allowed to soak before they
are washed.This will eliminate the need for extra wash cycle.
Pull out the rack to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the items which are the most diffi-
cult to clean items on the lower rack:pots ,lids,serving dishes and
bowls,as shown in the figure to the right.
It is preferable to place serving dishes and lids on the sides of the
racks in order to avoid blocking the rotation of the top spray arm.
- Pots,serving bowls,etc.must always be placed top down.
- Deep pots should be slanted to allow the water to flow out.
- The silverware basket can be doubled(see fig.A) so that only
one section may be used when the silver ware load is light. This
also makes space for additional pots and pans on the bottom
rack.
- Silverware should be placed in the silverware basket with the
handles at the bottom;if the rack has side baskets,the spoons
should be located individually into the appropriate slots.Espe cially
long utensils should be placed in the horizontal position at the
front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter
dishware,such as glasses,coffee and tea cups and saucers,as well
as plates,small bowls and shallow pans(as long as they are not
too dirty).
Position the dishes and cookware so that they do not get moved
by the spray of water.
The upper rack can be adjusted for height.(see fig.B)
Lower Rack
Load for 12 Standard Settings
.5.
Upper Rack
1
3
fig.A
2
4
fig.B
GB

Hide quick links:

Advertisement

loading

  Related Manuals for Haier WQP12-AFM2