Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual page 32

Chapter
3
Getting Sarted Guide
The New User page appears.
3. In the Username field, type the username. The name must be made up of alphanumeric
characters (that is, a-z, 0-9), any case, to a maximum of 32 characters. This field is required.
4. Select the group you want to assign as the user's primary group from the Primary Group field. If
there are no groups configured, the only available choice is the default group "nasusers". This
field is required.
5. Assign a password by entering any valid (ASCII table) characters in the Password field. The
password is required. To verify the password, re-enter it in the Confirm Password field.
6. To record the user's full name, enter it in the Real Name field. This field is optional. Note that you
cannot enter the "/" character in this field.
30
NOTE: Although you can assign the user to multiple
groups (through the Add Group or Edit Group page), the
primary group is the group against which quota charges
for the user's storage usage are made and is the group
that defines the group ownership for all files created by
the user. The primary group applies to users set up locally
on the NSS. A domain user's primary group is set up
from the domain and is not derived from the Primary
Group field in the NSS user profile.
NOTE: All password changes to end-user accounts set up
through the NSS configuration pages must be made by
the administrator.
Chapter 3: Configuring the Network Storage System (NSS)
Step 9: Create any Locally Defined Users and Groups