Step 7: Configure The Nss Network Identification - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

Business series network storage system
Hide thumbs Also See for Linksys Business Series Network Storage System NSS4000:
Table of Contents

Advertisement

The RAID page appears.
Exported disks from other NSS units in the network appear in the New RAID Device table.
3. From the New RAID Device table, click the disks or arrays that you want to include in the JBOD.
4. Select JBOD as the RAID level.
5. Click Add.
The JBOD appears in the RAID Arrays listing. You can now create volumes from the virtualized
JBOD.

Step 7: Configure the NSS Network Identification

To configure the NSS network identity:
1. From the Manager Menu, click Network
Chapter 3: Configuring the Network Storage System
(NSS)
Identification.
Chapter
Getting Started Guide
25
3

Advertisement

Table of Contents
loading

Table of Contents