Replacement Of Air Purifying Filter - Haier HSU-09HV03 Operation Manual

Maintenance

Replacement of Air Purifying Filter

1.Open the lnlet Grille
Open the inlet grille by pushing each ends of
the inlet grille upward.(use thumbs to push
up)
2.Detach the standard air filter
Slide the knob slightly upward to release the
filter, then withdraw it.
3.Attach old Air Purifying Filter
Put air purifying filter appliances into the
right and left filter frames.
4.Attach the standard air filter
(Necessary installation)
5.Close the Inlet Grille
Close the Grille surely
Common sense:
The air purifying filter of the bacteria-killing medium and the multi-lights touching intermediary
is effective for a long time and don't need to be changed (UV light emitted by the UV light
device of the indoor unit catalytically activates the nano TiO
intermediary, and the degerming effect is highly efficient and lasting. multi-lights touching
intermediary don't need to be exposed to the sunlight.)
But in the use, please note to clean the filter frequently (take off the back suction cleaner
or lightly pat it) to avoid the operating effect is lowered due to the dust covering the filter.
Multi-lights touching intermediary and bacteria-killing medium filter is strictly prohibited
from being cleaned by water.
The the bacteria-killing medium filter not in use should be stored in shade, cool and dry place.
Please don't expose it to the sunlight for a long time otherwise the degerming performance will
drop.
Detach old Air Purifying Filter
The green aspect of the bacteria-killing medium
air purifying filter will face outside, the white
aspect will face to the machine.
Note: the bacteria-killing mediums placed on the
left side. the multi-lights touching intermediary is
placed on the right side.
on the multi-lights touching
2
22