Operation - Haier AP282ACAEA Operation And Installation Manual

Operation

Manual Operation
Remote controller operation
OFF
TEMP
ON
OFF
SWING
1
MODE
HEALTH FRESH
CLOCK
2
3
TIMER
5
4
FILTER
LIGHT
RESET CODE
5.Timer setting for TIMER OFF
Press time buttons
6.Time confirming for TIMER OFF
After time setting, press SET button to confirm time.
unit starts at X hour X min.
7.Canel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the time setting sequence of TIMER ON and TIMER OFF, either start-stops or
stops-start can be realized.
If the time setting of TIMER ON is the same as TIMER OFF, TIMER ON-OFF function cannot
be set.
4
2
TIMER
CLOCK
SET
6
Set clock correctly before starting TIMER operation
1.Unit start
After unit start, select your desired operation mode (operation
A
mode will be displayed on LCD)
2.TIMER mode selection
Press TIMER button on the remote controller to change TIMER
mode. Every time the button is pressed, display of TIMER mode
changes as follows:
TIMER ON TIMER OFF
FAN
Then select TIMER ON-OFF mode.
SLEEP
3.Time setting for TIMER ON
Press time button
Every time the button is pressed, time increases 10 minuts.
SET
If the button is kept pressed, time will changes quickly.
HIGH/SO
6
Every time the button is pressed, time decreases 10 minuts.
If the button is kept pressed ,time will changes quickly.
It can be adjusted within 24 hours at will.
AM refers to morning and PM refers to afternoon.
LOCK
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm time.
Now
ON
Time displayed : unit starts at X hour X min.
and follow the same procedures in " Time setting for TIMER ON"
3
AM :
TIME
TIMER ON
TIME
AM :
LOW MED HIGH
TIMER OFF
5
SLEEP
AM
ON OFF
12:00 12:00
AM
PM
stops to flash, while
OFF
11
Timer ON-OFF Function
TEMP MODE
C
ROOM
TEMP
TEMP
FAN SPEED
SWING
blank
ON OFF
12:00 12:00
AM
PM
TIMER ON-OFF
will flash.
ON
starts flashing.
OFF
stops to flash. Time displayed:
ON
OFF
1