Sleep Function; Operation Mode - Haier AP182AZAAA Operation And Installation Manual

Cabinet type air conditioner
Table of Contents

Advertisement

Operation
Before going to bed you can press down the SLEEP button and the air conditioner will run so as
to make you sleep more comfortably.
Before using this function, the clock must be set.
Use of SLEEP function
After the unit's start, set running mode and then press SLEEP button once to make the air conditioner
have the previous-set sleep time (first power-on is "1h"). The sleep symbol will appear. Press time
button
/
: you can choose the time in 1~8 hours. Each time the button is pressed, the time
increases/decreases 1 hour: "xh" and "OFF" indications appear on the display.

Operation Mode

1.In COOL, DRY mode
One hour after sleeping operation start, the
temperature
is 1 C higher than the setting one. After another
hour, temperature rises 1 C: sleep run continuously
for another 6 hours and then stops. The actual
temperature is higher than the setting one which
is to prevent from being too cold to your sleep.
2.In HEAT mode
One hour after sleeping operation start, the
temperature
is 2 C lower than the setting one. After another
hour, temperature decreases by 2 C more.
Temperature will automatically rise by 1 C after
another 3 hours' continuous operation. The actual
temperature is lower than the setting one which
is to prevent from being too hot to your sleep.
3.In AUTO mode.
The air conditioner will run in corresponding sleep
operation according to the automatically selected
operation mode.
Notes:
After setting SLEEP function, it is not possible to set clock.
If set-sleep time does not reach 8 hours, unit will automatically stop
operation after set time is reached.
Set " TIMER ON " or " TIMER OFF "In COOL,DRY mode function first,
then set SLEEP. After set SLEEP function, the TIMER function cannot
be set.
SLEEP RUN BEGINS
1 hrs
SETTING T
In COOL,DRY mode
SETTING T
1 hrs
SLEEP RUN BEGINS
9

Sleep Function

SLEEP RUN STOPS
about 6 hrs
increase 1 C
increase 1 C
SHUT DOWN
SHUT DOWN
decrease 2 C
1 hrs
decrease 2 C
about 6 hrs
3 hrs
increase 1 C
SLEEP RUN STOPS
In HEAT mode
SWING
MODE
HEALTH
CLOCK
TIMER
FILTER
RESET
CODE
A
A
U
T
O
OFF
TEMP
ON
OFF
FAN
SLEEP
FRESH
SET
HIGH/SO
LIGHT
LOCK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Au182afafaAu182afmfa

Table of Contents