Haier AD182AMEAA Operation And Instruction Manual page 15

Installation Manual For Indoor Unit
(3) Avoid installation and use at those places listed below.
(a) Places exposed to oil splashes or steam (e.g. kitchens and machine plants).
Installation and use at such places incur deteriorations in the performance or corrosion with the
heat exchanger or damage in molded synthetic resin parts.
(b) Places where corrosive gas (such as sulfurous acid gas) or inflammable gas (thinner, gasoline,
etc) in generated or remains. Installation and use at such places cause corrosion in the heat exchanger
and damage in molded synthetic resin parts.
(c) Places adjacent to equipment generating electromagnetic waves or high-frequency waves such as
in hospitals.
Generated noise may cause malfunctioning of the controller.
(4) Preparation for suspending the unit
(a) Size of hole at ceiling and position of hanging bolts
<Combination with silent panel>
57
(b) Hanger bolts installation
Use care of the piping direction when the unit is installed.
A
(Hanging bolt position)
B
(Ceiling hole size)
C
(Panel dimensions)
Dimensions
Model
For series 182 242 282
For series 362 422 482 522
Hole-in anchor
Hole-in plug
137
30
(Ceiling ~ panel
wrap dimensions)
A B
1000 1180
1406 1600
Insert
Concrete
Hanging bolt M10
14
Unit: mm
C
1240
1660