Download Print this page

Stanley FATMAX FMHT1-77359 User Manual page 5

Machine control receiver

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Operation
Sets of LEDs will flash quickly as shown below when in the modes shown.
If the laser goes above or below the receiver, the last set of LEDs to detect the laser will flash slowly.
Yellow
Green
Red
Receiver
too high
or lost
beam
Receiver
too high
or lost
beam
Troubleshooting
No Signal
Specifications
Range:
Accuracy:
Actual accuracy and range depend on beam diameter and distance to the transmitter.
Reception height:
Reception angle:
IP Rating:
Power:
Battery life:
Auto Shut-off:
Operating temperature:
Size:
Weight:
1-YEAR WARRANTY
Stanley warrants its electronic measuring tools against deficiencies in materials and / or workmanship for one year
from date of purchase.
Deficient products will be repaired or replaced, at Stanley's option, if sent together with proof of purchase to:
Stanley Black & Decker
210 Bath Road
Slough, Berkshire SL1 3YD
UK
Subject to change without notice
3 Channel
Receiver
on grade
5 Channel
Receiver
Receiver
Receiver
little
on grade
little
high
low
• Receiver out of range
• Receiver turned off
10 m - 200 m (33ft - 650 ft.)
Fine - 6 mm (0.25") typical
Coarse - 30 mm (1.18") typical
15 cm (6.90") detection window
230 degrees
IP67 (receiver)
(3) AA alkaline batteries
~ 130 hours
1 hr (no activity)
-28°C to 70°C (-18°F to 158°F)
22 x 10 x 12 cm (8.5" x 5" x 4")
2.2 kg (4.8 lbs) w/o batteries
Receiver
too low
or lost
beam
Receiver
too low or
lost beam
5

Advertisement

loading