Create A Speed Dial List; Assign A Speed Dial To A One-Touch Key; Clear Or Reassign Speed Dial Lists To One-Touch Keys - HP MFP Analog Fax Accessory 300 Supplementary Manual

Create a speed dial list

1
2
3
4
5
6
7

Assign a speed dial to a one-touch key

Before you can use the one-touch keys you must assign a speed dial
name to a one-touch key.
1
2
3
4
5
Clear or reassign speed dial lists to one-touch
keys
If you wish to remove a speed dial list from a one-touch button,
perform the following steps.
1
2
3
8 Chapter 3 Changes to the fax user interface
On the control panel main screen, touch the FAX icon to display
the Fax screen.
Touch Speed Dial to display the Speed Dial screen.
Touch Add.
Type a fax number using the keypad. If you wish to enter more
than one number, touch Next Number and enter another number.
Repeat this step to enter all the numbers for the speed dial.
Touch the Name button to display the keyboard.
Type a name for the speed dial using the keyboard, and then
touch OK to return to the New Speed Dial screen.
Touch OK to accept the new speed dial.
Touch Configure on the fax screen to display the One Touch
Button Configuration screen.
Touch any (Available) number you wish to assign to the speed
dial.
Select the speed dial check box you wish to assign to the key.
Touch OK.
Touch OK to accept the settings.
Touch Configure on the one-touch keypad to display the One
Touch Button Configuration screen.
Touch the number key with the speed dial name you wish to
remove.
The "Button is already configured" screen displays. Perform any
of the following.
• Touch Clear to remove the speed dial name from the
one-touch button.
ENWW