Table of Contents
Advertisement
Chapter 2
Installing the Cisco Unified Videoconferencing 3545 Gateway
Type the password you want the user to use to log in to the gateway interface and press Enter.
Step 7
There is no default password.
The network configuration Main menu re-appears.
Step 8
Enter Q and press Enter to exit.
Step 9
Upgrading Gateway Software
Software upgrades for the gateway include the software components that are upgraded for the new
version and a utility to upload the software to the unit. This section describes how to upgrade the
software. For more information, see
Procedure
Download the upgrade software to a host that can access the gateway.
Step 1
Unzip the upgrade file.
Step 2
Double click the upgrade.exe file.
Step 3
In the Target IP field, type the IP address of the gateway for which you want to upload the software.
Step 4
In the User Name field, type the software user name.
Step 5
This is a global login name that the upload, upgrade, and Telnet utilities use to log in to the gateway
software. It can also be used to access the Administrator interface. The default user name is admin.
In the Password field, type the software password.
Step 6
The default value is null.
Note
Click Upgrade.
Step 7
The upgrade process takes a few minutes. After the upload completes, the Upload Complete Message
dialog box appears.
Click OK.
Step 8
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Release 5.5
OL-14912-01
To view the software components that will upgrade, click Customize. The Customize dialog
box appears. If you do not want to upgrade a component, deselect it.
Chapter 3, "Using the Cisco Software Upgrade
Initial Gateway Configuration
Utility".
2-13
Advertisement
Table of Contents
