Download Print this page

HP Netelligent 2008 User Manual: Logging Out Of The Management Session; Snmp Management

Hp netelligent 2008: user guide.
Hide thumbs


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Administration and Management

Logging Out of the Management Session

The Logout screen lets you end the VT100 management session.
Figure 4-11. Logout Screen
If you select Yes, the Login screen reappears and you have 10 seconds to retype
the password if desired.

SNMP Management

Using SNMP over IP or SNMP over IPX, an SNMP network manager can
manage any unit in a Netelligent 2008/2016 repeater stack. You can set various
parameters, including the write community and write protect flag, using the
nws2StackTable MIB object. Modifying this object sets parameters for each
repeater in a stack by sending SNMP requests to a single repeater. The
remaining SNMP management requests (for example, enable/disable ports,
backup port assignments, trap table entries, statistics) must be directed to the
SNMP agent in each individual repeater in the stack.


   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: