Download Print this page

HP Netelligent 2008 User Manual: Viewing The Stack Configuration

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-28
Administration and Management

Viewing the Stack Configuration

The Stack Configuration screen shows the backplane type (isolated or non-
isolated), IP address, IP netmask, and default gateway for a selected unit in the
stack. To select a unit, move the cursor to the Unit field and press <-> or <+> to
change the unit number.
Figure 4-4. Stack Configuration Screen
Error Messages
The following error message can occur if there is an incorrect entry:
ERROR: The field must be in the range [0...255]

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: