Download Print this page

HP Netelligent 2008 User Manual Page 55

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General unit level parameters (these parameters are configured
during boot)
IPX trap table (10 recipients; default = none)
Routing information (5 entries; default = none)
Intrusion
sysName (RFC1213)
snmpEnableAuthenTraps (RFC1213)
nws2WriteProtected (NWS2000 MIB)
nws2WriteCommunity (NWS2000 MIB)
nws2BootpRarpRequests (NWS2000 MIB)
SLIP IP address (default = 0.0.0.0 (none))
SLIP IP network mask (default = none)
IP trap table (10 recipients; default = none)
IP address
SNMP community name
backplane (isolated or bussed; default = bussed)
link test disable/enable for each port (default = enabled)
ports disabled (default = enabled)
IPX address
SNMP write community name
MAC address for each of the 17 ports
Intrusion Status (Disabled, Enabled, Tripped) for all 17 ports
Security Password (6 characters)
IPX Frame Type
SAP Disable
IP Frame Type
Netelligent 2008/2016 10Base-T Repeater User Guide
4-13

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: