Download Print this page

HP Netelligent 2008 User Manual Page 52

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-10
Administration and Management
global.dummy:\
:sm=255.255.255.0:\
:bf=c:\flash\nw8v101.img:
# Next, define different master entries for each subnet. . .
subnet105:\
:tc=global.dummy:gw=192.103.93.139:
# The Hostname contains the firmware version followed by the entire
# MAC Address (including leading zeros). Modify the appropriate entries
# as needed using the following legend:
#
# ht = hardware type
# ha = hardware address
# ip = IP Address for the unit with the above "ha"
# gw = Gateway IP Address
# sm = Subnet Mask
# bf = bootfile name (including path - must be << 64 characters)
# hn = hostname (do not fill in). This entry will cause the hostname
#
to be sent as part of the BOOTP Response. This is necessary
#
for the unit to TFTP properly. If no TFTP Flash update
#
is desired, then remove the "bf=..." and "hn:" lines and the
#
continuation slash from the preceding line.
#
# Examples are shown below. Each entry should have a unique hostname.
# The hostname can only contain alphanumeric characters.
8NW110.00.00.79.58.00.22:\
ht=ethernet:\
ha=000079580022:\
ip=192.103.93.10:\
sm=255.255.255.0:\
gw=192.103.93.139:\
bf=c:\flash\8nwv110.img:\
hn:
NWV101000079580026:\
ht=ethernet:\
ha=000079580026:\
ip=192.103.93.11:\
sm=255.255.255.0:\
gw=192.103.93.139:\
bf=c:\flash\nwv130.img:\
hn:

Advertisement

   Also See for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: