Download Print this page

HP Netelligent 2008 User Manual: Spatial Requirements

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2
Planning Repeater Installation
NOTE: If the supplied shielded power cord is lost or damaged, replace it with an
identical shielded power cord set to ensure emissions compliance.

Spatial Requirements

The repeater's dimensions are 1.75 x 17.00 x 8.4 inches, 4.44 x 43.18 x 21.34
centimeters (HxWxD).
You can interconnect up to ten repeaters in one stack. If there is not enough
space to mount the repeaters in a single rack or stack them on a single shelf, or
if you want to place the repeaters in different locations, you can place them side
by side on separate shelves or in separate racks. If this is necessary, you will
need longer repeater expansion port cables to connect the repeaters. See the
"Cable Requirements" section in this chapter for more information.
Be sure to allow at least 2 inches (5.1 centimeters) on each side of the repeater
for proper air circulation and cable connections.
Frequency: 50 Hz 60 Hz
Power: 0.25 A to 0.5 A maximum
CAUTION:
The power outlet must be a non-switched, three-pronged,
grounded outlet. Do not use a three-to-two pronged adapter at the outlet.
Doing so may result in electrical shock and/or damage to the repeater.

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: