Download Print this page

HP Netelligent 2008 User Manual: Uplink Switch; Lithium Battery

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Uplink Switch

The uplink switch allows the eighth port on the 8-port repeater and the sixteenth
port on the 16-port repeater to function as either a standard IN RJ-45 port or an
uplinkable OUT RJ-45 port.
Uplinkable
"OUT" Port
Figure 1-8. Uplink Switch
IN ports use an internal crossover of the receive and transmit lines, enabling the
port to connect to a network interface card using standard 8-wire UTP cable.
OUT ports use a straight-through (uncrossed) connection, enabling the port to
connect to any IN port of another repeater located higher in the stack. This
allows two isolated repeaters to be on the same segment.

Lithium Battery

For information about the lithium battery, see the "Notice" section at the front
of this guide.
UP LINK
MDI MDI-X
16
UP LINK
COM PORT
MDI MDI-X
Standard
"IN" Repeater Port
(Default)
EXPANSION
IN
OUT
Netelligent 2008/2016 10Base-T Repeater User Guide
1-9

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: