Download Print this page

HP Netelligent 2008 User Manual: Repeater Expansion Ports

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6 Overview
Figure 1-4. Alternate Media Connectors

Repeater Expansion Ports

The Repeater Expansion Ports (REPs) let you interconnect up to 10 repeaters to
form a single logical stack. Each REP consists of a standard RJ-45 connector.
The OUT REP of one repeater connects to the IN REP of the repeater located
immediately above, using a standard 8-wire (four twisted pairs) UTP cable
(Figure 1-5).
Optional Alternate Media Connectors
BNC Connector
(Thinnet)
BNC for Thinnet (Part Number 267064-001)
DB-15 for AUI wiring (Part Number 267063-001)
Fiber (Part Number 267065-001)
NOTES:
th
— The MEP is the 17
— Link test is available for the fiber optic AMC (i.e., hardware is always
enabled, but firmware can effectively disable link test). Link test is not
available for AUI or BNC AMCs.
AUI Connector
logical port on the repeater.
Fiber Connector
(10BASE-FL)

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: