Download Print this page

HP Netelligent 2008 User Manual: Rj-45 Ports; Media Expansion Port

Hp netelligent 2008: user guide.
Hide thumbs

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEP LED
Yellow
(16-Port Only)
Green
Flashing Green
OFF
UTP Status
Yellow
LEDs
Green
Flashing Green
OFF
NOTE: LEDs listed as yellow might appear orange on the repeater's front panel.

RJ-45 Ports

The 16-port repeater has 16 RJ-45 ports and the 8-port repeater has 8 RJ-45
ports. These ports let you connect UTP or STP cabling to workstations and
servers in a 10Base-T network.

Media Expansion Port

The 10Base-T repeater has a Media Expansion Port (MEP) that lets you install
one of the three optional Alternate Media Connectors (AMCs, sold separately)
shown in Figure 1-4:
The port is in a partitioned state
The Fiber port is in a link OK state.
The port is in a receiving state.
A link fail state occurred at the Fiber port or there is no connection at the
Fiber port.
The port is in a partitioned state.
The port is in a link OK state.
The port is in a receiving state.
The port link state failed or there is no connection at the port.
Netelligent 2008/2016 10Base-T Repeater User Guide
1-5

Advertisement

   Also See for HP Netelligent 2008

   Related Manuals for HP Netelligent 2008

This manual also for:

Netelligent 2016

Comments to this Manuals

Symbols: 0
Latest comments: